-->
Update: A Windows 10 driver now exists for the USB2-E1000. However, it will not appear in the CD that comes with the adapter until the next lot of adapters is shipped. The updated driver can be downloaded from this link: Windows 10/8/8.1, 7, Vista, and XP drivers for USB2-E1000. Installing Plugable USB-Ethernet Drivers in Windows 10. Microsoft Windows Mobile Device Center 6.1 Driver for Windows Vista (64-bit) This new version of the Windows Mobile Device Center contains key improvements and new features to support Windows Mobile 6 devices. The Windows Mobile Device Center 6.1 is only supported on Windows Vista. Remote NDIS (RNDIS); 2 minutes to read. Remote NDIS is precise enough to allow vendor-independent class driver support for Remote NDIS devices on the host computer. Microsoft Windows versions beginning with Windows XP include a Remote NDIS driver for USB devices. RNDIS on Windows 10 to connect to CE7 running on T20. Here is another useful link from Microsoft. This suggests than an RNDIS device should use USB class 2 and subclass 0. But the T20 uses class 2 and subclass 2, which matches the serial port driver that Windows 10 is loading. By installing a signed driver I made Windows 10 use my.
Remote NDIS (RNDIS) is a bus-independent class specification for Ethernet (802.3) network devices on dynamic Plug and Play (PnP) buses such as USB, 1394, Bluetooth, and InfiniBand. Remote NDIS defines a bus-independent message protocol between a host computer and a Remote NDIS device over abstract control and data channels. Remote NDIS is precise enough to allow vendor-independent class driver support for Remote NDIS devices on the host computer.
Microsoft Windows versions beginning with Windows XP include a Remote NDIS driver for USB devices. To use this driver with a USB device, an IHV must provide an INF file that follows the template in Remote NDIS INF Template.
Microsoft Support. Applies to: Windows 10. When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver. How to Install the RNDIS Driver for Ethernet Connectivity over USB Revised 2016-02-25. 4 Sixnet Series RAM ® and SN Tech Note 10. Click Yes on the warning that appears and once it completes click close. The new driver will begin to install. When done, click Close and Exit Device Manager.
Remote NDIS messages are sent to a Remote NDIS device from the host, and a Remote NDIS device responds with an appropriate completion message. Messages are also sent in a unsolicited fashion from a Remote NDIS device to the host.
This section includes:
-->Microsoft provides an NDIS miniport driver, Rndismp.sys, which implements the Remote NDIS message set and communicates with generic bus transport drivers, which in turn communicate with the appropriate bus driver. This NDIS miniport driver is implemented and maintained by Microsoft and is distributed as part of all supported Windows versions. You can find it in the %SystemRoot%System32drivers directory.
To use the Remote NDIS driver with a USB device, an IHV must provide an INF file according to one of the following templates: